Model |
Capacity of active chlorine generation per hour |
Quantity of water that can be treated with 01 hours generation @ 1 ppm |
AQUACHLOR GEN TM 05 |
05 Grams |
5,000 Liters |
AQUACHLOR GEN TM 10 |
10 Grams |
10,000 Liters |
AQUACHLOR GEN TM 15 |
15 Grams |
15,000 Liters |
AQUACHLOR GEN TM 20 |
20 Grams |
20,000 Liters |
AQUACHLOR GEN TM 25 |
25 Grams |
25,000 Liters |
AQUACHLOR GEN TM 50 |
50 Grams |
50,000 Liters |
AQUACHLOR GEN TM 05 : 5,000 Liters of water per hour with 1 ppm dosing
MODEL |
AQUACHLOR- GENTM –05 |
RATEDPRODUCTION CAPACITY |
05 Gram per HOUR AVALIABLE CL2 |
MODE OF PRODUCTION |
Continuous |
WATER CONSUMPTION |
01 LITRE |
SALT CONSUMPTION |
20 Grams |
D.C. RECTIFIER |
|
A.C. INPUT |
230V, SINGLE PHASE, 50 Hz 15 AMPS, AC SUPPLY WITH PROPER EARTH CONNECTION |
D.C. OUTPUT |
50 AMPS
06 VOLTS |
SCOPE OF SUPPLY
FOLLOWING ARE THE MAIN COMPONENTS OF
AQUACHLOR- GENTM –05 ELECTROCHLORINATOR.
1. BRINE TANK
2. MSEP SKID
3. ELECTROLYSER ASSEMBLY
4. NAOCL STORAGE TANK
5. DOSING PUMP
6. RACTIFIER PANEL
SYSTEM DISCRIPTION
- INSTALL THE ELECTROCHLORINATOR AT A SUITABLE PLACE.
- CONNECT THE POWER CABLES BETWEEN RECTIFIER OUTPUT TERMINAL AND THE ELECTROLYSER.
Note: ENSURE THAT THE POSITIVE OUTPUT OF THE RECTIFIER IS CONNECTED TO ANODE AND NEGATIVE IS CONNECTED TO CATHODE OF THE ELECTROLYSER, RESPECTIVELY.
- PLUG THE RECTIFIER INPUT CABLE TO A SINGLE PHASE 50Hz, 220V, 15
- AMPS SOCKET WITH PROPER EARTH CONNECTION.
- ADD 20 GRAMS. OF SALT INTO A SEPARATE CONTAINER AND PREPARE A FINE BRINE SOLUTION BY ADDING 60 ML OF WATER. ALLOW THE SOLUTION TO SETTLE DOWN FOR 5-10 MINUTES. DO NOT DISTURB THE TANK
- NOW PASS 1.0 LITER OF RAW WATER IN ONE HOUR WITH BRINE SOLUTION ADDED THROUGH BRINE TANK AND BOTH WILL PASS THROUGH
ELECTROLYSER ASSEMBLY.
- FINNALY NAOCL WILL BE GENARATED AND WILL BE STORED IN NAOCL
STORAGE TANK
- DOSING OUMP WILL DOSE THE APPROPRIATE AMOUNT OS GENERATED HYPOCHLOITE (NAOCL) TO THE POINT OF APPLICATION.